LTR VAS 6774 Manual Del Usuario página 9

Operating Instructions VAS 6774
APPLICATION
Even extremely small quantities of petrol can lead to problems in diesel fuel systems. The undesired impurities
lead to the corrosion of engine parts which can lead later to the failure of individual components.
The VAS 6774 can be used for an initial test before every diagnosis of a diesel system. The proof of contamination
with petrol is possible from a proportion of 0.2 %.
The power supply of the VAS 6774 is made exclusively from a 12V DC supply (for example, an external battery).
The VAS 6774 must be used exclusively for the applications named above.
1)
2)
3)
90°
500 ml
3.1
INTRODUCTION
Preparation
1)
Place the VAS 6774 carry case on a horizontal, safe and steady
base (for example, a stable table or work bench etc.) and open
the VAS 6774 carry case.
IMPORTANT!
Remove all sources of ignition, open fires etc.
within a 3 m surrounding area. Explosion hazard!
Remove the measuring cylinder (VAS 6774/2) from the carry
1.1
case set (VAS 6774). Remove the cleaning brush (VAS 6774/4)
from the measuring cylinder (VAS 6774/2).
2) Fuel Sampling
Take a fuel sample, exactly 500 ml, from the diesel fuel system.
Dispose of any excess fuel sample (everything above 500 ml) in
2.1
accordance with the country-specific guidelines.
IMPORTANT!
Under no circumstances must the sample/part sample enter the
environment (drain system etc.).
Setup
3)
Insert the measuring cylinder (VAS 6774/2) in the holder
provided.
Check that the measuring cylinder (VAS 6774/2) is securely
3.1
fitted.
- 9 -
english