sylvac S Dial TEST Instrucciones De Uso página 11

Note:
- Bluetooth pairing information is cleared when the profile is changed.
®
Connection :
1° Activate Bluetooth compatible software and hardware (Master : PC, Display Unit).
®
2° Start the instrument. By default the Bluetooth
module is active and the instrument is available for connection (advertising
®
mode).
3° If no connnection is established during the advertisement period reactivate the Bluetooth module using the bt / On menu.
®
4° Instrument is ready to communicate (connected mode.)
E
Only with paired profile :
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), pairing information on the instrument must be cleared using the bt
/ rESEt menu.
11