sylvac S Dial TEST Instrucciones De Uso página 6

1. Operating features of the instrument
- The instrument has two operating modes: basic functions (direct access) and advanced functions. In addition
MODE
to the configuration functions, you can access to MIN, MAX and DELTA (TIR) mode, plus input of multiplication
factor other than 1:1 (see chaps. 3 and 4).
- The «favourite» key gives direct access to the function used most often (see chap. 6).
- Sets a Preset value, resets the MIN/MAX mode, verifies a selection, and controls switching off the instrument.
SET
By default, SIS mode enables automatic switch-off with no loss of origin (see chap. 7).
- Personalising the functions
It is possible to activate or de-activate certain functions of the instrument via RS232 (see chap. 9).
- Data transmission parameters
4800Bds, 7 bits, even parity, 2 stop bits.
2. Start
Press a button.
When used for the first time, after a battery change or a complete switch OFF, it is necessary to set the reference
( --rEF-- ). Simply press (SET) when the touch probe is free in the center position (see page 3).
For a Bluetooth
connection (see chap. 5).
®
6