General Functions; Power Input - JB Systems max Strobe BF-045P Manual De Instrucciones

General Functions

1. Power Input

AC 100V~130V / 60 Hz or 230V~250V / 50 Hz
2. Power Switch
On/Off.
3. Speed Knob
With this you can adjust the flash rate.
Caution
Avoid direct eye exposure.
•
Disconnect from main power before replacing lamp or servicing
•
unit.
Remember to always replace with the same kind of lamp.
•
To prevent fire or shock hazard, do not expose this unit to rain
•
or moisture.
3 Max Strobe