sylvac ISP091201D Instrucciones De Uso página 15

6. Favourite key
The «favourite» key gives direct access to a predefined function, and can be configured according to the needs of the
user. In order to assign a function to the «favourite» key, give a prolonged press on
function :
Validation of selection: By a prolonged press on
Note :
- A function can also be assigned via RS232 using the command <FCT + Function No.> (FCT 0..9 A..F)
example : Unit change= <FCT6>, no function =<FCTA>.
Data
transmission
(default)
Hold display
Zero reset
Reference 1 to 4
or a short press on
Preset recall
Bluetooth ON-
®
OFF
mm – IN
0.01 ↔ 0.001
or
SET MODE
15
, and then select the required
Measurement direction,
positive - negative
1:1 - N:1 factor
No function
.
E