Tripp-Lite NG5POE Manual Del Propietário página 5

Product Features
1 Power ON/OFF LED: An LED illuminates to indicate the switch is receiving power.
2 Ethernet Port LEDs: Each LED will illuminate when a connection is present and blink
when the port is active.
Notes:
• NG5POE only: PoE (Power over Ethernet) is limited to ports 1-4. LEDs illuminate green for all
network connection speeds.
• NG8POE and NG16POE only: LEDs illuminate orange for 10/100 Mbps network connections and
green for 1000 Mbps network connections.
3 PoE LEDs: The corresponding PoE LEDs illuminate green when an active PoE device
connection is detected.
4 PoE Max LEDs (NG8POE only): These two LEDs illuminate to indicate when the
maximum power budget of each port group has been reached (MAX 1=Ports 1-4,
MAX 2=Ports 5-8). They will blink when the maximum power budget for the port group
has been exceeded. They turn OFF when the maximum power budget is less than the
available power offered by each port group.
5
Gigabit Ethernet Ports: Each of the RJ45 twisted-pair ports support auto-negotiable
10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for true "plug
and play" capability. Each port can supply up to 30 watts of PoE power per port over
existing network cables to attached devices like VoIP phones, wireless access points
and surveillance cameras.
6 AC Input: This 100-240V 50/60 Hz C14 inlet accepts the included AC power cord or
any country-specific AC power cord supplied by the user.
PoE Power
Model
NG5POE*
NG8POE
NG16POE
* PoE power available on ports 1-4 only.
** Total PoE power budget split into two 70W PoE port groups.
17-06-328-9335EB.indb 5
PoE Power per Port
Up to 26W
Up to 30W
Up to 30W
5
Total PoE Power (switch)
75W
140W**
230W
6/20/2017 2:37:08 PM