Rackmount Installation - Tripp-Lite NG5POE Manual Del Propietário

Quick Installation
1U Rackmount Installation
The NG8POE is shown in the installation diagram. The other two models can also be rack
mounted.
1 Attach the mounting brackets to each side of the switch with the included screws. Be
sure the mounting bracket "ears" are facing forward.
1
2
Mount the switch with user-supplied rackmount hardware.
Note: The user must determine the fitness of the rackmount hardware to hold the unit in the rack
before installation.
2
3
Connect the switch to a properly
grounded outlet. The Power LED will
illuminate when the switch turns on.
4
Connect network cables to the network
switch.
17-06-328-9335EB.indb 7
3
4
7
6/20/2017 2:37:12 PM