Cleaning And Maintenance - Beurer BARBERS CORNER HR 2000 Instrucciones De Uso

8. Cleaning and maintenance

Cleaning the miniature blade
Blow on the miniature blade after the
application in order to clean it of hair.
Fine hairs can also be removed with
your fingers.
WARNING
When cleaning with your fingers, make
sure that you do not injure yourself on
the sharp edges of the miniature blade.
To clean the miniature blade particularly
thoroughly, you can rinse it under running
water. Proceed as follows:
1. Turn the head of the device slightly to
the right and remove the head.
2. Hold the miniature blade (1) under
running water so that the stream of
water runs over the razor blade.
54