Preferences - LD Systems LDDSP44K Manual De Usuario

6
Close the Ethernet Config window and click on the magnifying glass icon with the plus sign under Devices (Fig. 1).
The connected amplifier will be displayed with model number, name and serial number under Amplifiers (Fig. 2). You can now synchronize
the entire library in the data memory with the software by double-clicking on the power amplifier model (Fig.3).

PREFERENCES

Project - Preferences – click on the button Preferences to enter general settings such as relative humidity and ambient temperature (for
delay calculation), to define minimum and maximum values in the Frequency Response window, to activate unwrapped phase range and
to switch the phase threshold from Auto to Full Band and vice versa. Clicking Restore defaults values will restore these to factory settings
when the software is next started.
6