Description; Components; Monitor - Extel MEMO 2 Instrucciones De Uso

2. DESCRIPTION

1 • Monitor 4 • Outdoor station
2 • Wall mounting 5 • Rain Shield
3 • Mains adapter
Generality
This videophone consists of an interior unit with a colour, liquid crystal display screen, a free hand interphone, and
a surface-mount exterior outdoor station which makes it possible to see and speak to the visitor who as rung. To
make the most of the videophone, please take the time to read this instruction manual thoroughly, and do not
lose it.

3. COMPONENTS

a. Monitor
(fig. 2)
1. 7" (18 cm) colour screen.
2. Slot for SD Card (32GB max), not included.
3. Melody selection (9 bell sounds available).
4. Light settings
5. Volume settings for sounds coming from outside.
6. Volume settings for the bell sound.
7. Refreshing the picture on the monitor // navigation on the "left" menu
8. Monitor turned on, linked to the intercom unit. This only needs to be pressed once to activate the connection
to the intercom panel. Pressing a second time will turn off the connection and the picture on the intercom panel
// navigation on the "right" menu
9. Automatic opener control (only available if the screen is turned on)// Exit a menu.
10. Strike plate/lock control (control with power connected, one-touch)(available only if the screen is on) // Con-
firm in the menu.
11. Enter the menu // exit the menu // take a photo (screen on)
12. Microphone for communicating with the intercom panel.
13. Message indicator (LED flashes when a visitor has called with no response)
14. Removable terminal block to connect the wires.
15. On the back of the monitor, socket for the adaptor's 17V plug
installation standards: NFC 15-100 for France).
b. Intercom panel, outdoor camera
1. IR LED for better visibility in the dark (light invisible to the naked eye).
2. Adjustable C-MOS camera lens (at the back of the camera).
3. Loudspeaker: allows you to be heard outside.
4. Call button: when this button is pushed, the bell sound is heard inside. The screen and the camera are activated.
5. Lit name holder (automatic back-lighting of the name holder depending on the amount of daylight). To change
the label in the name holder, gently lift the plastic cover (9) using a small screwdriver and slide the label out.
6. Mic: allows visitors to communicate with those inside.
7. Holes for adjusting the camera lens
8. Removable terminal block to connect the wires
(fig 1)
(fig. 3)
CFI EXTEL MEMO 2 - 03/2013
(adaptor connected in accordance with current
GB2