Alarm And Functions Menu; Settings Menu - MZ electronic EV030-Radio Instrucciones De Uso

Exit
To return to the settings menu.

Alarm and functions menu

Use the (DOWN) or
Up Alarm
It is possible to enable the function and
establish the height at which the anchor-
winch stops; after which it is only possible to
give pulsed commands.
Settable values: from 0.5 to 20.0 with
increment of 0.5 (metres or feet)
Auto Down
Enables the automatic anchor lowering
procedure, at the desired height, with the
pressing (for at least 3 seconds) of the keys
and .
Settable value: from 5 to 250 with increment
of 5 (metres or feet)
Load Default
This function allows the User to revert to the
original factory default settings, thus erasing
all settings memorised.
This command must only be used in the
event of programming errors.
Exit
To return to the settings menu.

Settings menu

Use the (DOWN) or
EV030-Radio
Confirm with
Alarms & Functi
U p A l a r m
A u t o D o w n
L o a d D e f a u l t
E x i t
(UP) key to move around the parameters.
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
Confirm with
Confirm with
Settings
Contrast
L ight
T urnoff Time
Keyb. Beep
Exit
(UP) key to move around the parameters.
3 . 0
O f f
N o
= Yes = No
30
Yes
24
English
Rev. 08 – 2019