VOX Amplification satchurator Manual De Usuario página 6

setting this knob at moderate settings for classic rock and blues rhythm and lead
tones and crank it up from there for powerful, smooth lead tones.
Output: This is the 1/4" output. Plug a second guitar cable between this and
3.
your amp, or between this and the next pedal in your chain.
4. Pad: The pad switch is a subtle, but highly useful control that maximizes dynam-
ics and tone with bright guitars and/or effects (such as wah) placed before the
distortion. Down is the standard default position of this switch. Up engages the
pad.
5. "ON" LED: This LED illuminates when the Satchurator is turned on.
Note: If this LED begins to dim, light unstably or if your pedal makes any unusual
noise, your battery is almost empty. If this happens, please replace the battery.
When the battery is completely empty, you will hear no sound from the pedal.
6. ON: This switch turns the Satchurator on and off.
7. Tone: This knob controls the overall tone and EQ of the pedal. Turn this knob
clockwise to increase the overall brightness of the effect, and counter-clockwise
to roll off highs and achieve a darker sound.
8. Volume: This knob controls the output level of the effect. Turn this knob clock-
wise to increase the output level, and counter-clockwise to decrease the output
level. Use this control to either match or boost your unaffected tone, based on
your personal tastes.
6