VOX Amplification satchurator Manual De Usuario página 7

9. Input: This is the 1/4" input. Plug your guitar into this. Connecting a guitar cable
to the "INPUT" jack will turn on the power automatically. For extended battery
life, always unplug your guitar cable from the input when not in use.
10. "MORE" LED: This LED illuminates when the "MORE" switch is engaged.
11. MORE: This switch activates "MORE" mode. This feature was a request of Joe
and adds a huge amount of tonal flexibility to this pedal that most traditional
distortion pedals do not have. At high gain settings, "MORE" provides a subtle
boost in gain and midrange that is just enough to push your leads to the top of
the mix, without adding unwanted distortion, clipping or noise. At lower-to
moderate gain settings, the "MORE" switch will boost the gain significantly,
allowing for dual-sound setups. Try setting the gain control at 2 o'clock and
using the "MORE" switch to boost your tone to the equivalent of the pedal's "10"
gain setting. That's two totally different and dynamic sounds in one pedal!
Battery compartment: This is where you can access the 9V battery.
7