Publicidad
CFC 49120
4. Mount the top cover to the mounting plate, hang the fan to two of the screws and the washers of the
assembly using the L-holes. Make sure that no cables are blocked during assembly.
5. Tighten all the screws, make sure that the lid is properly hung and that no thread is blocked. Make sure
that the pendulum slot fits correctly into the thumbtack of the top cover.
6. Install the fan blades on the motor by tightening the screws and spring washers.
IMPORTANT: BEFORE STARTING THE INSTALLATION YOU MUST CUT THE ELECTRICAL SUPPLY
1. The structure of the support (including the junction box) must be able to support the weight of the fan.
Some junction boxes require additional reinforcement such as steel brackets that secure the device more
firmly.
2. Adjust the connections through the center of the box.
3. Connect the cables to your installation taking into account that the neutral cable of your installation can
be blue and the phase cable can be brown, black or gray
OPERATION INSTRUCTIONS
Remote regulator for ceiling fan is supplied for installation. It is turned clockwise from the mark ‚5‛ to ‚1‛
indicating the speed from fast to slow while turning counter-clockwise from ‚1‛ to ‚5‛ indicating from
slow to fast. And ‚0‛ means off.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on human health and
the environment.
The crossed out ‚wheeled bin‛ symbol on the product reminds you of your obligation, that when
you dispose of the appliance, it must be separately collected. Consumers should contact their
local authority or retailer for information concerning the correct disposal of their old appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2006/95/EC and the
requirements of the EMC directive 2004/108/EC.
12
Publicidad
