Loewe Wireless Rear Sound Instrucciones De Montaje página 10

3
4
5
5a
6
10
Installing the Wireless Rear I Sound
receiver module,
for example on a table
Procedure
Place a blanket or the felt from the packing material underneath
for assembly.
Take the Wireless Rear I Sound receiver module and the installa-
tion support from the packing.
Push the installation support into the holding slot on the rear
with moderate force, fi g. 3 and fi g. 4.
Notes for sticking
The surface to stuck to must be free from dust and
grease and must be dry. Room temperature (approx.
20 °C) is recommended for sticking.
Stick both adhesive feet to the bottom for better stability.
The soft round parts with packing are shown in fi g. 5a.
Pull the protective foil off the adhesive feet and stick these on as
shown in fi g. 5, arrows.
The Receiver module now looks like the one shown in fi g. 6.