Power Supply Unit - Loewe Wireless Rear Sound Instrucciones De Montaje

20
21
22
24
22
23

Power supply unit

Power supply unit and 3 different country-specifi c primary adap-
ters (adapter for short), fi g. 20.
Mount the adapter on the power supply unit
- Select the right adapter for your country
The adapter shown here is for Germany.
- Make sure the hook catch (adapter)
and the recess (power supply unit) match up, fi g. 21
- Mount the adapter on the power supply unit, fi g. 22
- If the hook catch (adapter) and
the recesses (power supply unit) are in line you can
press the adapter onto the power supply unit (low
pring travel)
- Press in the adapter and push as far as possible in the
direction of the arrow, fi g. 23
The adapter is then connected to the power supply
unit.
Removing the adapter from the power supply unit
See fi g. 24
Release the catch in the direction of the arrow (fi g. 24, arrow 1)
and push the adapter in the direction of the arrow (fi g. 24,
arrow 2) as far as it goes
The adapter can now be removed.
You will fi nd further information in the operating manual (233-
33150 Wirless Audio I Sound)
Plug the power supply unit into a 220-240V 50Hz socket.