Loewe Wireless Rear Sound Instrucciones De Montaje página 18

13
14
15
16
18
Wiring the transmitter module,
system interface for Audio-Link
Check equipment of TV set.
This cable can be used for sets from chassis L 2710 upwards.
Take the Audio-Link adapter cable out of the packing and feed
the plug through the opening in the half shell of the unit hou-
sing as shown in fi g. 13.
Make sure the plug is in the right position.
Plug in the plug as shown.
Lay the cable as shown in fi g. 15.
The power supply unit provided is not required here.
Push the two half shells of the unit housing back together.
You can simply stand the transmitter module on a suitable base
(e.g. table) as shown here.