Product Introduction - MCS Master DH 752 P Manual De Instrucciones

PERSONS (INCLUDING CHILDREN) WITH REDUCED
PHYSICAL , SENSORY OR MENTAL CAPABILITIES,
OR LACK OF EXPERIENCE AND KNOWLEDGE , UN-
LESS THEY HAVE BEEN GIVEN SUPERVISION OR IN-
STRUCTION CONCERNING USE OF THE APPLIANCE
BY A PERSON RESPONSIBLE FOR THEIR SAFETY.
CHILDREN SHOULD BE SUPERVISED TO ENSURE
THAT THEY DO NOT PLAY WITH APPLIANCE.
► Please do not cut off the power by pulling the wire.
► Please do not plug or unplug to startup or shut off the
unit.
► Please be careful when moving the unit, do not man-
gle the wire.
► Please do not put fingers or sticks into the grid.
► Please prohibit child to climb, stand or sit on the unit.
► Please unplug the unit before cleaning or mainte-
nance.
►► SAFETY RELATING TO REFRIGERANT
►
R290:
► Read these warnings carefully.
► This appliance contains the refrigerant R290. R290
is a refrigerant that complies with the relevant European
Directives. Never perforate the refrigerant circuit. R290 is
flammable (GWP3)!
► Do not use means to accelerate the defrosting process
or to clean, other than those recommended by the manu-
facturer.
► The appliance shall be stored in a room without conti-
nuously operating ignition sources (for example: open fla-
mes, an operating gas appliance or an operating electric
heater).
► Do not pierce or burn any of the components of the
cooling circuit of the unit. Do not set light to the unit.
► The appliance shall be stored so as to prevent mecha-
nical damage from occurring.
► Appliance should be installed, operated and stored in
a room with a floor area larger than 4m
► Be aware that the refrigerants may not contain an
odour, which means you cannot smell leaks.
► Compliance with national gas regulations shall be ob-
served.
► Keep ventilation openings clear of obstruction.
► A warning that the appliance shall be stored in a
well-ventilated area where the room size corresponds to
the room area as specified for operation.
► Any person who is involved with working on or brea-
king into a refrigerant circuit should hold a current valid
certificate from an industry-accredited assessment au-
thority, which authorizes their competence to handle refri-
gerants safely in accordance with an industry recognized
assessment specification.
► Servicing shall only be performed on the grounds as
recommended by the equipment manufacturer. Mainte-
nance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the
person competent in the use of flammable refrigerants.
NOTICE: WE SUGGEST THAT ANY REPAIRS
SHOULD BE EXECUTED BY PROFESSIONAL
SERVICEMEN
► please make sure the unit is grounded
► please do not use unit in airproof conditions
► please follow the instructions thoroughly

PRODUCT INTRODUCTION

Dehumidifiers can reduce air humidity in room and thus
make people live comfortably and goods stored proper-
ly. Due to their neat appearance, compact configuration,
high quality and easy operation, our dehumidifiers are
widely used in research institutions, industry, transpor-
tation, medical centers, measuring institutions, stores,
underground constructions, computer rooms, archives,
warehouses, bathrooms, etc. Keeping apparatus, meters,
computers, communication equipments, drugs and files
away from moisture, eroding, and mildew.
►
► Dehumidifier FIG. 1
1. Handle
2. Control panel
3. Wheel
4. Water tank
5. Water tank panel
6. Filter grill
7. Hour counter
► Control panel FIG. 2
1. humidity display
2. operate indicator
3. defrost indicator
4. memory indicator
5. tank full indicator
6. memory
7. humidity up
8. humidity down
9. on/off button
►
.
2
► ON/OFF: Press ON/OFF, the unit runs in a circulation
"ON-OFF-ON".
► Humidity up and down: Press "humidity up and down"
for once, the set humidity will increase or decrease by
1%. Press the key for 1.5 seconds and the set value will
increase or decrease by 1%. Press continuously with the
speed 5 points per second.
► Memory Key: Press the memory key and the mem-
ory indicator will light on to start the function of memory
when the power cuts off. Press the memory key again; the
memory indicator dies to shut off the function of memory
when the power is cut off.
START ON:
► Plug on the unit gives off "di".
► Press "ON/OFF", the running indicator lights on, and
the humidity display window lights on to display the previ-
ously set humidity. The initial humidity setting is 60% and
3 seconds later the humidity display window lights on to
display current humidity.
► Press humidity up or down key to adjust the humidity
needed. If the set humidity is 3% less than current hu-
midity, the unit runs; if the set humidity is 3% more than
current humidity, the unit stops running.
► When set humidity is less than 30%, the unit dehumid-
►► 2. CONSTRUCTION
►► 3. OPERATION INSTRUCTION OF KEYS:
en
it
de
es
fr
nl
da
fi
no
sv
pl
ru
cs
hu
sl
hr
lt
lv
et
ro
sk
bg
uk
zh
SI
SK
TR
UA