Joining Each Pvp X6Ip (Creating A Modular Design); Vertically Joining The Panels - Chauvet PVP X61P Manual De Usuario

5. Joining Each PVP X6IP (Creating a Modular Design)

Vertically Joining
the Panels
PVP X6IP User Manual, Rev. 4
Each PVP X6IP can be easily joined vertically to a truss using an optional rig bar with an
extra eye bolt connector (sold separately) and the 2 female Speego connections located
at the top corners of each panel. Use the male Speego connections at the bottom of
each panel to connect additional panels. These connectors stay recessed when not
being used.
Panels must be installed with the extra Eye Bolt Kit as shown above on a single
column installation when using PVP X-Series Rig Bar.
Joining Each PVP (Creating a Modular Design)
Eye Bolt Kit
(RB-XEBK)
Male
Speego
15