Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PVP Module Care and Replacement
Access Security Screw
PVP X6IP LED Module
installation with MT-02
Service Access Latches
1. Orient the product on a flat table as shown.
2. Unscrew the Access Security Screw.
3. Unlatch and open Service Access Door
4. Place the new PVP X6IP module on a flat surface.
5. Carefully attach the MT-02 to the front and center of the module.
6. Use the knob on the MT-02 to secure it to the module.
7. Orient the module so the arrow just above the louver adjustment knob on the back is
pointed up.
PVP X6IP User Manual, Rev. 4
25
Publicidad
Tabla de contenido
