Vip Sample Video Wall System Setup - Chauvet PVP X61P Manual De Usuario

Typical PVP Installation
VIP Sample Video
Wall System Setup
Media
Server
USB
VIP Driver
Other Video Sources
9-Pin Serial Cable
VIP Driver
You may connect up to
4 VIP Drivers in a
single system. Be sure
to set DIP switches
accordingly.
28
The following diagram provides a sample setup for a Chauvet VIP video wall system.
This system setup includes an optional signal processor for additional video sources,
and the VIP Signal Distributor to support more panels. Note that the two-driver setup
shown here allows for simultaneous playback of pre-recorded and live content, all
directed from a single PC.
Refer to the signal processor User Manual and the VIP Signal Distributor Quick
Reference Guide for information on those video wall components.
DVI or HDMI
For pre-recorded
content; no video
processor in line
with this
connection.
Signal Processor
DVI or HDMI
VIP Signal Distributor
Neutrik etherCON
Second driver
allows for
external video
sources for
live playback
Neutrik etherCON
Neutrik etherCON
Neutrik etherCON
Neutrik etherCON
PVP X6IP User Manual, Rev. 6