Horizontally Joining Panels; Horizontal Panel Connection - Chauvet PVP X61P Manual De Usuario

Horizontally Joining
Panels
Horizontal Panel
Connection
PVP X6IP User Manual, Rev. 4
Each PVP X6IP can be easily joined horizontally using the 2 locking knobs on the inside,
upper and lower left-hand side of each panel.
Use the following instructions to join panels horizontally:
1. Align each of the panels' male Speego connections with the corresponding female
connections on the panels being added.
2. Push male Speego connections into female Speego connections on each side of the
panels.
3. Turn the knobs until tight to hold in place.
Align each panel horizontally with the Speego
connection using the alignment marks
Twist tight to secure panel
Joining Each PVP (Creating a Modular Design)
17