List Of Components - Inglesina Kit Auto Pro 3P Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
owner of this item.
charge of parts with factory defects.
of purchase in a clearly legible manner.
the event that:
- the product is used for purposes that are not expressly
indicated in the instructions herein.
- the product is not used in compliance with the
instructions herein.
- the product has been repaired by unauthorised and
unaffiliated Customer Care centres.
- the structural or textile part of the product has been
modified and/or tampered with, without prior expressed
authorisation by the manufacturer. Any modifications
made to the products relieve Inglesina Baby S.p.A. from
any liability.
- the defect is due to negligent or careless use (e.g., violent
shocks to the structural parts, exposure to aggressive
chemical substances, etc.).
- the product presents normal wear (e.g., wheels, moving
parts, fabrics) due to prolonged and continuous use.
- the product is sent to the retailer for assistance without
the original receipt or when the date of purchase is not
clearly legible on the receipt.
and/or not approved by Inglesina Baby, shall not be covered
by the warranty.
damage to property or injuries to persons resulting from the
improper and/or misuse of the product.
guarantees customer care service for its products for a
maximum period of four (4) years from the date said products
were placed on the market; after this period, assistance
interventions will be assessed case by case.
reserves the right to update and/or modify any aesthetic or
technical detail without prior notice.
SPARE PARTS / AFTER SALES SERVICES
functionality over time. Do not use the product in the event
of any malfunction and/or anomaly. Promptly contact your
Authorised Retailer or the Inglesina Customer Care service.
not approved by Inglesina Baby.

LIST OF COMPONENTS

fig. 1
A
3-point safety harness
B
Connection devices
C
Shock absorbing cushion
FASTENING THE SAFETY HARNESS
The 3-point safety harness (A) must be fastened to the
bottom of the carrycot.
CAUTION! When travelling in vehicles, remove any
additional mattress.
fig. 2
Ensuring that the head support of the carrycot is
completely lowered, insert the two white loops of the back
WHAT TO DO IF YOU REQUIRE ASSISTANCE
contact the Inglesina Retailer that sold it to you, with the
"Serial Number" relative to said object ready on hand (the
"Serial Number" is available from the 2010 Collection).
Serial Number reference should be kept.
best suited intervention case by case and then provide the
subsequent indications.
information, following written request by filling out the form
provided on the website: www.inglesina.com - Warranty and
Assistance section.
HINTS FOR CLEANING AND MAINTAINING THE
PRODUCT
doubt, check the instruction first.
or snow; moreover, continuous and prolonged exposure to
sunlight may cause changes in the colour of many materials.
mild detergent; do not use solvents, ammonia or benzine.
order to avoid the formation of rust.
garments.
carrycot periodically. In detail, separate the textile lining from
the structure and run a dry cloth over the bottom.
INSTRUCTION
(D) of the harness in the dedicated holes on the carrycot's
plastic base, passing through the internal lining (E).
fig. 3
external base of the carrycot.
fig. 4
crotch strap (F) into the hole at the bottom of the carrycot,
always passing through the internal lining (E).
fig. 5
housings on the external base of the carrycot.
fig. 6
fastened by pulling it firmly upwards from inside the
carrycot.
Handwash in cold water.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
WARNING! Never wash the straps; just wipe them with a
cloth and a gentle detergent.
Place the white loops (D) into their housings on the
Complete the fastening, inserting the loops of the
Place the loops of the crotch strap (F) into their
Ensure that the 3-point harness (A) is correctly
15

Publicidad

Tabla de contenido
loading

Tabla de contenido