Installation instructions
[]
Bottom
freezer
hinge
DISCONNECT
THE POWER
COUPLING
(on some models)
If the refrigerator
has a water
dispenser,
there
is a power
line (harness)
from
the
cabinet
into the bottom
hinge
on the
freezer
door that must
be disconnected.
To disconnect,
pull apart
at the coupling.
[] CLOSE THE FREEZER AND
REFRIGERATOR
DOORS
[]
DISCONNECT
THE ELECTRICAL
CONNECTORS
(on some models)
If the refrigerator
has a refreshment
center, there
are electrical
connectors
(harnesses)
from
the cabinet
into the
bottom
hinge
on the refrigerator
door
that
must
be disconnected.
To disconnect,
pull apart
each connector.
Bottom
refrigerator
hinge
[] REMOVE THE FREEZER DOOR
[]
Remove
the freezer
door top hinge
cover
by either
squeezing
it and pulling
it up or
by prying
it off with
a plastic
putty
knife.
[]
[]
Remove
the two
5/16"
hex head screws,
then
lift the hinge
straight
up to free the
hinge
pin.
5/16" Hex Head
Open the freezer
door to 90. °
19
90 °