Refrigerator Doors; Door Alignment - GE Profile GSM23YBP Manual De Uso Y Cuidado

Ocultar thumbs Ver también para Profile GSM23YBP:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Freezer Crisper
On some models
To remove, slide out completely to the stop
position. Lift the front past the stop
position, and slide out.
Make sure you push the crispers all the way
back in before you close the door.
About the additional features.
About the refrigerator doors.

Refrigerator Doors

The refrigerator doors may feel different
than the ones you are used to. The special
door opening/closing feature makes sure
the doors close all the way and are securely
sealed.
When opening and closing the door you
will notice a stop position. If the door is
opened past this stop point, the door will
54
ShelfSaver
Rack
(on some models)
Use this rack to store
beverage cans for easy
access.
It can also hold a 9 x 13
baking dish.
Removable Beverage Rack
The beverage rack is designed to hold a bottle on its side. It
can be attached
to any slide-out shelf.
To install:
Line up the large part of the slots on
the top of the rack with the tabs under the shelf.
Then slide the rack back to lock it in place.
When the door is only partially open,
it will automatically close.
Beyond this stop the door will stay open.

Door Alignment

If doors are uneven, adjust the refrigerator
door.
7/16 Socket Wrench
Raise
Freezer shelves
On some models
To remove, take away all the food,
slide out to the top position, lift the
front past the stop position, and
slide out.
Make sure you push the shelves all
the way back in before you close the
door.
Not all features are on all models.
Door Can Rack
(on some models)
This door rack holds up
to 9 cans.
NOTE: This rack can only be
mounted in the top position
under the dairy bin.
remain open to allow you to load and
unload food more easily. When the door
is only partially open, it will automatically
close.
The resistance you feel at the stop
position will be reduced as the door
is loaded with food.
Using a 7/16 socket wrench, turn the
door adjusting screw to the right to
raise the door, to the left to lower it.
(A nylon plug, imbedded in the
threads of the pin, prevents the pin
from turning unless a wrench is used.)
After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top of
the doors.
1
2

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido