BABYTREND nexgen Manual De Instrucciones página 7

OPERATION
TO ADJUST SEAT HEIGHT
WARNING:
adjust seat height with child in
seat. Adjust seat height before
placing your child in the high
chair.
WARNING:
Always check that the height
adjustment bracket is level
and both left and right sides
locked before placing child in
the high chair.
WARNING:
rest the height adjustment
bracket on the locking pins.
14) • Squeeze the Release Handles on both
sides simultaneously of the Height
Adjustment (Fig. 14a) and adjust to the
ideal position (Fig. 14b).
DO NOT adjust with child in the seat.
ATTENTION:
Make sure the Height Brackets lock on
the lowest position. DO NOT rest Height
Adjustment Brackets on the Locking Pins
(Fig. 14c).
11
Copyright © 2020, Baby Trend ® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Do not
Fig. 14a
Never
Highest Position
Lowest Position
Locking Pin
Fig. 14b
Fig. 14c
TO FOLD HIGH CHAIR
The High Chair may be folded with the seat in
any of the height positions.
Release Handle
15) • Place seat in the desired height position.
Place Seat Back in the most upright
position (Fig. 15).
16) • Squeeze the tray release handle and
slide the tray out (Fig. 16).
17) • Hang the tray on the hooks located on
the back of the rear leg (Fig. 17).
18) • Pull upward on the release levers
(located on the sides of the frame) and
push the rear legs in the direction of the
front legs until folded (Fig. 18). Chair is
now ready to put away.
DO NOT allow your child to play around
a folded high chair as it may fall.
TO UNFOLD HIGH CHAIR
Read the Warning and see (Fig. 18), then
Reverse the steps above.
WARNING:
on the frame when the seat is
not attached. Do not use frame
as a foot
point when opening the frame.
Do not sit
stool. Potential pinch
Copyright © 2020, Baby Trend ® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
OPERATION
Fig. 15
Tray Release located underneath tray
Fig. 16
Fig.17
DO NOT place
fingers here.
Fig. 18
12