Technical Data - ALLURIS StroboVision SMS-400B Instrucciones De Servicio

7.2. Connecting the external sensor
2m connection cable (Part No.: SMS-943) with Master-/ Slave-wiring as well as 3m extension cable (Part No.:
SMS-944) are available for chaining several stroboscopes.
8.0 Technical Data / Maintenance

8.1. Technical data

Operation range:
Accuracy :
Resolution:
Operation modes:
Phase-shift:
External trigger:
Output :
Temperature range:
Storage:
Battery:
8.2. Maintenance
The instruments are maintenance-free, except for consumption parts in the next sections.
A 3,5 mm phono plug (Part No.: SMS-945) is to be used for the signal
output. The signal will be given on the ring in the middle.
Specifications for a 5 V TTL signal output:
Low Level
High Level
Pulsbreite
Min. Frequenz
Max. Frequenz
40...12.500 fpm (flashes per Minute)
0,01% +/- 0,5 fpm
0,1 fpm
Flashes with internal trigger
Flashes with external trigger
Tachometer
5° per increment
5 V TTL Signal
5 V TTL Signal
10°...35°C
-10°...45°C (store dry)
Removable 2,6Ah NiMH-rechargeable battery pack
Operation time approx. 2-2,5 h
Charging time approx. 2-4 h
Over-discharge protection
< 0,8 Volt
> 4,0 Volt
> 22 µsec (+/- 10%)
0,667 Hz
208,333 Hz
16