Mounting The Cutting Tool; Switch; Adjusting The Trimming Width - Virutex FC116U Manual De Instrucciones

E
Z
Y
N
18 - FC116U / Operating instructions

6. MOUNTING THE CUTTING TOOL

Check that the trimmer is disconnected from the
mains.
mounted on the end of the spline shaft.
the required diameter.

7. SWITCH

thus keeping the machine running.
up accidentally.

8. ADJUSTING THE TRIMMING WIDTH

decorative face of the lock.
Check that the trimmer is disconnected from the
mains.
slightly larger, according to the instructions in section 6.