Triton RSA300 Instrucciones De Uso página 5

Ocultar thumbs Ver también para RSA300:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Operation
Switchbox operation
IMPORTANT: When connecting power tools to the switchbox do not exceed
10A (2300W)
• Practise switching on and off before connecting the power
• Press the power switch with your finger to switch the power 'ON'. Tap the
stop plate with your hand or leg to switch 'OFF'
• Make sure the switch is 'OFF', plug your power tool into the switchbox
inside the front panel, and use an extension cord to connect the switchbox
to mains power
Note: The extension cord used must have a minimum rating of 10A. 13A
recommended
Storing the legs
• The legs have a convenient on-board storage location
• Loosen the Round Knobs (7) and remove the legs from their sockets
• Slide the Front Legs (4) inside the Rear Legs (5), ensuring that the holes in
each crossbar line up
• Insert the legs through the cut-outs in the rear panel and into the cut-outs
in the front panel with their holes facing outwards (D)
• Engage the holes in the legs over the tabs on the rear panel cut-outs and
rotate the latches to lock the legs in position (D)
Accessories
• A wide range of accessories are available from your Triton dealer. Spares
can be ordered through your Triton dealer or www.toolsparesonline.com.
Wheel Kit
• The Triton Retractable Wheel Kit (AWA100) fits this Router Table Stand for
convenient mobility
• When fitting the Retractable Wheel Kit to the rear legs, ensure the wheels
are not fitted to the same side as the holes in the legs
Guarantee
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated
otherwise) for information on future releases. Details provided will not be
made available to any third party.
Purchase Record
Date of Purchase:
___ / ___ / ____
Model: RSA300 Retain your receipt as proof of purchase
Maintenance
WARNING: ALWAYS disconnect the tool from the power supply, before
cleaning or carrying out maintenance.
General inspection
• Regularly check that all the fixing screws are tight. They may vibrate loose
over time
Lubrication
• Lubricate all moving parts with a suitable lubricant spray, at regular
intervals
Triton Precision Power Tools guarantees to the purchaser of this
product that if any part proves to be defective due to faulty materials or
workmanship within 3 YEARS from the date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of
charge.
This guarantee does not apply to commercial use nor does it extend
to normal wear and tear or damage as a result of accident, abuse or
misuse.
* Register online within 30 days.
Terms & conditions apply.
art pr
This does not affect your statutory rights
oves to be defecti
5
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido