Product Overview - LEGRAND C2G30010 Manual Del Propietário

HDMI HDBASET LITE EXTENDER OVER CAT KIT - 4K 60HZ

Product Overview

Front Panel
Transmitter / Receiver
F P D
RONT ANEL ESCRIPTION
On: Power is applied to the device.
1 Power LED
Off: No power is applied to the device.
Blinking: The device is working properly.
2 Status LED
Off: The device is not working properly.
On: HDCP protected content is being transmitted.
3 HDCP LED Blinking: Non-HDCP protected content is being transmitted.
Off: No content is being transmitted.
On: HDBT link is normal.
4 Link LED
Off/Blinking: No HDBT link or link error.
1 2 3 4
Rear Panel
6
5
8 9
R P D
EAR ANEL
Connect the power adapter provided.
5 / 8 DC 18V Note: The power adapter connected to either transmitter or
receiver is able to power on both units.
6 HDBT OUT Connect to the receiver via a Cat 5e/6/6a cable.
7 HDMI IN Connect to an HDMI source using an HDMI cable.
9 HDBT IN Connect to the transmitter via a Cat 5e/6/6a cable.
10 HDMI OUT Connect to an HDMI display using an HDMI cable.
2
Transmitter
7
Receiver
10
ESCRIPTION
(us)
(us)