E2S A105N APPELLO Manual De Instrucciones

24vdc : 10 - 30vdc
-
+
T2 T3
Stage 2 Stage 3
Stage 1 Frequency
Tone Description
T Tone 1 420Hz @ 0.625 sec Australian Alert
T
T
Tone 2 500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop
T
T Tone 3 2400/2900Hz @ 7Hz Sweeping
T
T
Tone 4 500-1200Hz 3.75sec /0.25sec. Australian Evac.
T
T Tone 5 Bell
T
T
Tone 6 1200/500Hz @ 1Hz - DIN / PFEER P.T.A.P.
T
T Tone 7 544Hz (100mS)/440Hz (400mS) - NF S 32-001
T
T
Tone 8 1000Hz Continuous - PFEER Toxic Gas
T
T Tone 9 554Hz Continuous
T
T
Tone 10 800/1000Hz @ 0.25 sec Alternating
T
Tone 11 1000Hz @ 1Hz Intermittent
Tone 12 2400Hz Continuous
Tone 13 800Hz Continuous
Tone 14 2400/2900Hz @ 1Hz Sweeping
A105N APPELLO
T2 & T3 Stage Options
'A' 'B' 'C'
Tone 5 Tone 8 Tone 4
Tone 10 Tone 8 Tone 12
Tone 8 Tone 14 Tone 10
Tone 1 Tone 8 Tone 5
Tone 10 Tone 13 Tone 2
Tone 13 Tone 2 Tone 10
Tone 10 Tone 5 Tone 9
Tone 10 Tone 11 Tone 5
Tone 5 Tone 7 Tone 12
Tone 8 Tone 6 Tone 11
Tel : 0044(0)2087438880
- Synchronised Voice Annunciation
130,0 0
Ø7,00
144,0 0
For instructions re lating to the r ecording of the voice messages please see the A105N SYNCHRONISED
APPELLO PROGRAMMER ins tr uc tions.
In or der for this sounder to remain synchronised with other Appello Synchronised units, the settings
must be identica l (with the exception of volum e) and the y must be activated simultaneously.
DAMAGE WILL OCCUR TO THE UNIT IF THE SUPPLIED VOLTAGE IS NOT W ITHIN THE LIMITS
SPECIFIED.
TONE SELECTION.
•
If a tone is required in addition to the voice message position connectors on pin rows T T as shown
in the tone table. (Tone 10 is Factory setting).
•
If a second and/or third stage tone is required there are 3 tones available for each first stage tone.
Position connectors on pin rows 2 and 3 as shown in the tone table to select one of the 3 tones for
each stage.
T2 - 2
T
T3 - 3
T
MESSAGE MODE SELECTION.
L
•
The Synchronised Appello offers a choice of 3 message mode options.
M
•
Option 'A' will play the selected tone, then play the message. The sequence is then repeated.
2
(Factory setting)
•
Option 'B' will play the selected tone, followed by the message twice. The sequence is then
3
repea ted.
•
Option 'C' will repeatedly play the message only.
•
Factory Setting
Position connectors on pin row M to select an option.
Rég lage en us ine
Werksein stell ung
M
Imp ostazi one di fabbrica
Aju ste de fábrica
VOLUME CONTROL.
Aju ste de fábrica
Fab riksin dstill ing •
There are 3 levels of volume available. Potentiometer P1 may also be used for further adjustment.
Fab rieksi nstell ing
•
Option 'A' : Maximum 50mA @ 24vdc
Fab rikkinns till ing
•
Option 'B' : Maximum 80mA @ 24vdc (Factory setting)
Fab riksin ställn ing
•
Option 'C' : Maximum 130mA @ 24vdc
•
Position connectors on pin row M H to select an option.
M H
Option ' A '
•
Pin row 'L' is not used.
mail : sales@e2s.com
& 10 Tone Sounder
126,0 0
Option ' A ' 2 Option ' B ' 2
Option ' A ' 3 Option ' B ' 3
Option ' A ' M Option ' B ' M Option ' C '
M H M H
Option ' B ' Option ' C '
Fax : 0044(0)2087404200 web : www.e2s.com
Option ' C '
Option ' C '