Phonic SMARTMAN 303A Manual De Usuario página 9

RS485 CONNECT
This section of the SETTING menu is used to establish
a connection between the computer and the Smartman.
The Smartman uses an RS485 protocol for all parameter
adjustments.
Connect: Once you've performed a search and found
your Smartman's COM port, simply push the connect
button to establish a connection.
SCENE SETTING
Click "SAVE" to save your current settings to the
connected commuter as a "scene" and click "LOAD" to
import saved scenes from connected computer. Once the
Smartman is off, the current scene will be saved on the
Smartman locally.
iPAD CONNECTION
Through the free Smartman iPad app, your iPad will
become a wireless control surface for your Smartman
audio system. When using Wi-Fi, ensure to switch the
rear-panel switch to Wi-Fi. Then do the following to
establish a connection:
1. Go into your iPad's Settings menu and enable Wi-Fi.
2. Select the SMARTMAN as your Wi-Fi source.
SMARTMAN 303A / SMARTMAN 703A
RS-485 CONNECTION
The Smartman offers direct control through Windows
control software via a typical Ethernet cable. The actual
control protocol is RS-485.
To use the Windows control software, the Smartman
system's interface selection should be set to "RS-485"
instead of "Wi-Fi".
1. Connect the Smartman with your Windows PC via the
shipped RS485 adapter with commercial
cable and mini USB-to-standard USB cable. Ensure
that Smartman and your PC are turned on and ready
to go.
2. Open the Smartman Windows Control Software.
3. The control software will detect and make
connection with the connected Smartman automatically.
Ethernet
the
5