JB Systems Light LED WALL DIMMER Manual De Instrucciones página 4

ENGLISH
MECHANICAL INSTALLATION IN WALL BOX:
The LED Wall Dimmer can be installed in any standard
recessed wall box with screw fixations:
 Take the cover plate off (easy click-on system)
 Locate the unit in the recessed wall box and fasten
with the 2 screws.
 Click the cover plate back on.
 Done!
FUNCTIONS
1. FADE/COLOR KNOB: has different functions, depending on the working mode (see n°5):
 RGB1 & RGB2 MODE:
Used the select one of the many preprogrammed colors. Use the SPEED/DIMMER knob (2)
o
to adapt the dimming level.
o Turn the knob completely to the left to start the FADE function: you will obtain a nice flow
from one color into another. Use the SPEED/DIMMER knob (2) to change the fading speed,
light output is always at maximum level.
 2 CHANNEL MODE: Used to dim DMX-channel 1 from value 000 to 255.
2. SPEED/DIMMER KNOB: has different functions, depending on the working mode (see n°5):
 RGB1 MODE: master dimmer (DMX-channel4) can be adapted from 0% to 100%. You can also
select the strobe function (from slow to fast) and music function.
 RGB2 MODE: master dimmer (DMX-channel4) can be adapted from 0% to 100%.
 2 CHANNEL MODE: Used to dim DMX-channel 2 from value 000 to 255.
3. STANDBY LED: is lit while the output of the Wall dimmer is set to blackout. Makes it easier to find the
wall dimmer in the dark.
4. STANDBY BUTTON: used to switch the output on/off (blackout)
5. MEMORY BUTTONS: buttons M1 and M2 are used to memorize 2 different output settings (scenes).
You can also use these buttons to choose one of the 3 working modes of the wall dimmer:
 MEMORIZE A SCENE: use the 2 knobs (1) and (2) to set the right light atmosphere. To memorize
this setting for future use, just press the M1 or M2 button until the STANDBY LED (3) blinks shortly.
You can do the same for the other memory button.
 SELECT WORKING MODES: see specifications for the exact DMX-channel distribution.
o RGB1 MODE: this is the standard working mode, nothing special should be done.
RGB2 MODE: press the STANDBY and M1-buttons together until the STANDBY LED (3)
o
blinks shortly.
2 CHANNEL MODE: press the STANDBY and M2-buttons together until the STANDBY LED
o
(3) blinks shortly.
6. COVER PLATE: two interchangeable cover plates for the different working modes can be easily clicked
on the wall dimmer.
7. WIRE TERMINALS: easy press-on wire terminals, see chapter "installation" for more information.
8. MOUNTING SCREWS: can be used to fix the wall dimmer in a recessed wall box, see installation for
more information.
JB SYSTEMS
®
OPERATION MANUAL
3/25 LED WALL DIMMER
ENGLISH
SPECIFICATIONS
Power Input: DC 12V / 400mA.
DMX outputs: wire terminals
DMX channels: RGB1 mode:
CH1 = RED (DMX-values : 000  255)
CH2 = GREEN (DMX-values : 000  255)
CH3 = BLUE (DMX-values : 000  255)
CH4 = MASTER DIMMER (DMX-values : 000  255)
RGB2 mode:
CH1 = RED (DMX-values : 000  255)
CH2 = GREEN (DMX-values : 000  255)
CH3 = BLUE (DMX-values : 000  255)
CH4 = MASTER DIMMER (DMX-values : 000  190)
2 CHANNEL mode:
CH1 = DIMMER1 (DMX-values : 000  255)
CH2 = DIMMER2 (DMX-values : 000  255)
Size: cover plate = 83 x 83 mm
Installation depth = 16 mm
Weight: 60 g
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS
®
OPERATION MANUAL
4/25 LED WALL DIMMER