Preliminary Checks; Lubrification - Daspi Bigfoot Manual De Instrucciones

g
eneral safety rules
Our compliments for your excellent choice. Your new
electromechanical barrier has been produced according to a high
quality and strict reliability, that's why it will assure you long-
lasting performance. This booklet will offer you all the pieces of
information you may need to install your barrier and to safe guard
your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part only,
during the installation and the upkeep. however, the caution
is unquestionably indispensable and nothing is better than
preventing accidents.
i
Mportant
Any installation or repair, or adjustment of the working machinery
by unqualified people is strictly prohibited unless all the necessary
precautions: power supply disconnected (included possible
batteries). All moving mechanism must be provided with suitable
protections.
DASPI is not responsible for any possible damages or injuries to
people, object or animals, caused by any use not provided for
this booklet and/or any unauthorized modification of the product.
Keep scrupulously this booklet enclosing it with technical brochure
of installation in a suitable place well-know by all the interested
people. You have to operate the elimination of the packing
material (cardboard, plastic, polystyrene, etc.) in conformity with
the regulations in force, remembering that for a child a plastic
envelope could be extremely dangerous. You have to teach the
people employed in using the automation about the control and
s M
ecurity echanisM
distance in MouVeMent
prodUcT
The gear motor BIG FOOT has been planned and
built in order to opening domestic or industrial
sliding gates with a weight from 1.200 kg to 2.200
kg, in conformity with the version verifiable on the
box or on the registration number. DASPI is not
responsible for any anomalous and different use of
the gear motor BIG FOOT.
imporTANT: The gear motor BiG FooT is not
provided with mechanical clutch and must be
installed with its dASpi control panel or with a
control panel provided with electronic clutch.
USE oF ThE AUTomATioN
As the automation can be controlled from the
distance through a remote control, you must always
check the full efficiency of all the safety devices. We
recommend inspecting periodically (every 6 Month)
by qualified people the adjustment of the electronic
clutch.
If you need to calibrate the protection consult the
paragraph "Adjustment of the electronical clutch" in
the instruction booklet of the electronic central unit.
englIsH
d e
o not install the lectric shocK
autoMation in place Full
oF explosiVe Moistures
security systems of the installation.Don't install this product in
explosive places.
u
pkeep
For any kind of upkeep, you have always to cut off the power
supply. For a correct upkeep of the installation where you
have installed the gear motor BIG FOOT follow carefully these
instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the
paragraph "Installation of the electronic central unit").
Lubrificate periodically the guide and the wheel of the gate.
In case of malfunction going and seeing qualified people.
d
eMolition
You have to operate the elimination of the materials in conformity
with the regulations in force. All material must be divided by type
(copper, aluminium, plastic, electrical central unit). However there
are not material considered dangerous for the handler.
d
isMantling
In order to dismantle or to move away the automation, follow
these instructions:
Cut off the power supply and disconnect the electrical
installation.
Dismantle the control console and all the other components of the
installation.
If you have noticed that some components have been damaged,
you have to replace them.
u
se
the GloVes

prELimiNAry chEckS

• Read carefully the instruction.
• Check that the product has not been damage
during the transport.
• Check that the gate structure is strong and that
during its movement there aren't friction points.
• Check that your product is adequate to the weight
of the gate.
• Check that the electrical installation is in
accordance with the characteristic required by the
gear motor.
• Check that there is a suitable ground safety system
and that the metallic parts of the installation is
connected.
• Check that the manual manoeuvre always is easily
practicable.
• Remember that the automation makes easy the
use of the gate but don't resolve the problems
due to a defective installation or to a faulty of
upkeep.

LUBriFicATioN

The gear motor BIG FOOT is provided with permanent
lubrification
u K
se Glasses eep the protection
For WeldinG carter