Intermec 7422 Guía De Usuario página 33

Operation
The FEED Control
The FEED Control can be used in two
ways, tapping or holding. When power is
first applied with labels loaded, tapping
the FEED Control will cause the paper to
advance to the top of the next label. This
action is referred to as a Form Feed.
FEED Switch
When power is first applied without labels
loaded, holding the FEED Control will
cause the printer to continuously Line Feed
until the control is released. This mode is
useful when loading labels in the printer.
After the labels have been threaded
through the printer, tapping the FEED
Control 3 more times (for a total of 4 taps)
will cause a Form Feed.
17