PART 2.
THE VARIOUS FUNCTIONS AND POSSIBILITIES
Thermostat Setting
Freezer thermostat automatically regulates the inside temperature of the compartments. By
rotating the knob from position "1" to "5", colder temperatures can be obtained.
Important note: Do not try to rotate knob beyond 1 position it will stop your appliance.
Freezer Thermostat Setting;
1-2: For short-term storage of food in the freezer compartment, you can set the knob
between minimum and medium position.
3-4: For long-term storage of food in the freezer compartment, you can set knob
medium position.
5 : For freezing the fresh food. The appliance will run for colder temperatures.
Note that
• The ambient temperature, temperature of the freshly stored food and how often the door
is opened, affects the temperature in the freezer compartment. If required, change the
temperature setting.
• For best internal temperature the indicator in the freezer thermostat should be positioned
between 2 and 4.
Turning On The Appliance
• When you first switch on the appliance, for starting a suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
• In this time do not open the door so often and place a lot of food inside the appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting
or re-plugged the unit in order not to damage the compressor.
Warnings about temperature adjustments
• Temperature adjustments should be made according to the frequency of door openings
and the quantity of food kept inside the freezer.
• When you first switch on the appliance, allow it to operate for 24 hours continuously to
cool down to the correct temperature.
• During this initial 24 hour period do not open the door or place a lot of food inside the
appliance.
• If the appliance is switched off or unplugged, wait at least 5 minutes before plugging the
appliance in or restarting it in order not to damage the compressor.
FREEZER THERMOSTAT
EN - 34 -