SystemRoMedic Baribar 454 Manual De Usuario página 6

English
Installing BariBar
Lower the lift strap and loosen the two screws on either end of the threaded pin. Insert the BariBar's lift point into the
H-adapter and replace the threaded pin. Replace the two screws with the lock washers. Use two 4 mm Allen keys to
tighten the screws.
Installation of BariBar on an overhead lift unit
1 x 90002955 (Threaded pin)
H-Adapter
2 x 90001656 (Lock washer 6.1x11.8x1.6)
Lift point
2 x 90001621 (Screw K6S M6x8)
2 x Allen key 4mm
Screw
Lock washer
Threaded pin
RiseAtlas/RiseBasic
1
2
3
4
SystemRoMedic
6 M A N U A L
TM