SystemRoMedic TurnSheet Manual De Usuario página 5

Placement
TurnSheet
3
TurnSheet mattress cover
4
Mattress
5
TurnSheet is placed and bedded in the bed in the order described above.
The mattress cover is secured around the mattress with Velcro strips.
The turning cover is placed on top, with the sliding surfaces facing each other.
Turn manually with TurnSheet
Turning with TurnSheet, two parts (Art no. 1597)
SystemRoMedic
M A N U A L
TM
User
1
Sheet
2
Pull the user to one side of the bed. Smooth out the sheet
and turning cover. Pull on the sheet and turn the user to the
desired position.
Tuck the sheet under both sides of the mattress and raise
the bed rails.
The TurnSheets suspension loop is hooked above the slingbar
on a mobile or overhead lift.
If bed rails are not used, a caregiver should stand beside the
bed to ensure safety.
Start turn by raising the slingbar. The caregiver with the best
view of the user operates the lift.
Turn the user to the desired position.
To ensure that the user is repositioned in the centre of the
bed, some manual adjustment towards the centre of the bed
may be necessary during turning.
When the user has been turned to the desired position, the
Velcro strip can be loosened behind the user.
Since the TurnSheet now supports the user's back, the
caregiver is free to attend to the user's hygiene.
English
Slide panel
6
5