Joyello WROOM JL-983 Manual De Instrucciones página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
GB
ADJUSTING THE SEAT BELTS FOR SAFETY GROUP I
Check the height of the seat belts.
These must be adjusted to the height of the child.
If they do not fit properly they should be adjusted according to the following guidelines
1. Press the button to adjust the seat belt with one hand, and then pull forward seat belts, including
covers, with the other hand in order to loosen (Fig. 1).
2. Remove the seat belt from the rear metal buckle lock, positioned on the rear backrest (fig. 2).
3. From the back of the back seat, pull the seat belt cover out from its slots and put it back in
another one of the three available slots according to the child's height (Fig. 3/4).
4. Replace the rear seat belt metal lock buckle, positioned on the rear backrest (fig. 5).
5. Pull the belt adjustment if necessary to correctly position the seat belt over the child's shoulders (fig. 6).
NOTE:
Make sure that the child is properly secured, that the buckle is not pressing on the child's
stomach, that the harness is tight without causing discomfort and that the shoulder pads
are at the right height for the shoulders.
SEAT INSTALLATION Group I
(For children weighing from 9 kg to 18 kg)
16
1. Position the child car seat so that it is not tilted, making sure that
the back of the seat adheres to the car seat as much as possible
(Fig. 1).

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wroom jl-984Wroom jl-985

Tabla de contenido