Product Set-Up - Meta System HPA Instrucciones De Montaje

COMMAND FOR SUPPLEMENTARY ACTUATORS
+30 V BATT.
FUSE*
RED/YELLOW
LIGHTBLUE/YELLOW
RED/WHITE
LIGHTBLUE/WHITE
RED/BLACK
LIGHTBLUE/BLACK
FUSE*
WITH 2 ACTIVATORS: 4A
WITH 4 ACTIVATORS: 8A
ACTIVATORS
OFF COMMAND FOR LOCKING
RED/WHITE
RED/YELLOW
LIGHTBLUE/BLACK
LIGHTBLUE/WHITE
ORIGINAL
CENTRAL
LOCKING
To alter the override code, the default operating features of the alarm control unit
and adapt them to suit a specific application, we recommend using the portable
PDC/CAR ALARM PROGRAMMER (Fig. 19).
The software updates for the programmer will be available ON LINE via the CAR
ALARM technical section of the www.metasystem.it website.
Fig. 15
EARTH
DRIVER'S
DOOR
ORIGINAL
WIRE
CUT
Fig. 17

PRODUCT SET-UP

10
PNEUMATIC COMMANDS
ORIGINAL WIRE
+30V BATT.
LIGHTBLUE/WHITE
RED/BLACK
FRONT DRIVER'S SIDE
DOOR KEY WITH
INCORPORATED SWITH
OFF COMMAND FOR UNLOCKING
LIGHTBLUE/WHITE
LIGHTBLUE/YELLOW
RED/BLACK
RED/WHITE
ORIGINAL
CENTRAL
LOCKING
ORIGINAL DOOR
LOCKING
COMPRESSOR
+30V BATT.
RED/YELLOW
LIGHTBLUE/YELLOW
Fig. 16
EARTH
DRIVER'S
DOOR
ORIGINAL
WIRE
CUT
Fig. 18
ALARM/PDC PROGRAMMER
MetaSystem code: P6987E
Fig. 19