Nilfisk Alto Turbo D Instrucciones De Manejo página 48

SERVICE AND
MAINTENANCE
REPLACEMENT OF THE
SAFETY FILTER BAG
Procedure:
- Switch off the cleaner
- Pull the mains plug
out of the socket.
- Lift the hood with the
filter cartridges from
the dust container.
- Pull the plastic cover
from the edge of the
container, pull
together the ends of
the plastic cover and
seal with thecable
connector supplied.
- Pull the filter bag neck
from the inlet fitting
and seal with the
cover.
- Remove the safety
filter bag from the
retainer and dispose of
in accordance with
local waste disposal
regulations.
- Install a new safety
filter bag in the
retainer.
- Press filter bag neck
firmly onto the inlet
fitting.
- Pull the plastic sleeve
over the edge of the
container.
- Fit the hood
For reorders: Safety filter
bag (pack of 5 bags), Art.
No. 33209
10
REPLACEMENT OF
FILTER CARTRIDGE
Before replacing the filter
cartridges (main filter),
the cleaner should be
switched off for approx. 5
minutes to allow the
remaining dust to settle.
Procedure:
a) Lift the hood with the
filter cartridges from
the dust container
and turn upside
down.
b) Push back the spring
steel brackets from
the filter cartridges.
c) Push the filter
protection sleeve over
the cartridges.
d) Pull off the filter
cartridges and knot
the filter protection
sleeve.
e) Fit new filter
cartridges.
f) Push on the spring
steel filter retainers
again.
g) Place the hood on the
dust container.
h) Dispose of the used
filter cartridges in
accordance with the
local waste disposal
regulations.
For reorders:
W W W W W ap absolute filter ap absolute filter ap absolute filter
ap absolute filter ap absolute filter
car car tridge tridge
car car cartridge tridge tridge (replace only in
pairs) Pack (1 cartridge)
with filter protection bag,
Art. No. 41164
W W W W W ap micr ap micr ap micr o-filter o-filter
ap micr ap micro-filter o-filter o-filter
car car tridge tridge
car cartridge car tridge tridge (replace only in
pairs) Pack (1 cartridge)
with filter protection bag,
Art. No. 11617
GUARANTEE
Guarantee and warranty
are subject to our General
Conditions of Sale and
Delivery.
MANUFACTURER
Wap Reinigungssysteme
GmbH & Co.
Guido-Oberdorfer-Str. 2-8
D-89287 Bellenberg
SOURCE FOR
"HAZARDOUS
SUBSTANCE
REGULATIONS" AND
"TLV RATINGS"
Carl Heymanns Verlag KG
Luxemburger Str. 449
50939 Cologne
"Hazardous Substance
Regulations" Order No. ZH
1/220
"TLV Ratings", latest
edition Order No. ZH 1/
401
Modifications in line with
technical developments
reserved!
APPROVED
ACCESSORIES
The complete range of
WAP accessories can be
used.