Declaration Of Conformity; Warranty Certificate - Oleo-Mac HCI 45- Efco TGI 45 Manual De Uso

11. DECLARATION OF CONFORMITY

The undersigned
GB
declares, under its own responsibility, that the machine:
1. Category:
2. Brand: / Type:
3. Serial identification number:
conforms to the requirements of Directives
conforms to the provisions of the following
harmonized standards
Conformity assessment procedures followed
Measured sound power level
Guaranteed sound power level
Made in
Date
Technical documentation filed in

12. WARRANTY CERTIFICATE

This machine has been designed and manufactured using
the most modern techniques. The company guarantees its
products for 24 months from the date of purchase, for home
and non-professional use. Warranty is limited to 12 months in
the case of professional use.
General conditions of warranty
1. The warranty period starts on the date of purchase. The
manufacturer, acting through the sales and technical
assistance network, shall replace free of charge any parts
proven defective in material, machining or manufacturing.
The warranty does not affect the purchaser's rights as
established under legislation governing the consequences
of defects in the machine.
2. Technical personnel will undertake the necessary
repairs in the minimum time possible, compatible with
organizational needs.
3. To make any claim under the warranty, this certificate
of warranty, fully completed, bearing the dealer's
stamp and accompanied by the invoice or receipt
showing the date of purchase, must be displayed to
the authorized personnel.
MODEL
SERIAL No
PURCHASED BY MR/MS
Do not send! Only attach to requests for technical warranties.
22
EMAK spa via Fermi, 4 - 42011 Bagnolo in Piano (RE) ITALY
electric hedge trimmers
Oleo-Mac HCi 45 – Efco TGi 45
650 XXX 0001 - 650 XXX 9999
2006/42/EC – 2014/35/EU – 2000/14/EC – 2014/30/EU –2011/65/EC
EN 60745-1+A11 – EN 60745-2-15+A1 – EN 55014-1+A1+A2 – EN 61000-3-3
Annex V
88.2 dB (A)
90.0 dB (A)
Bagnolo in piano (RE) Italy - via Fermi, 4
01/09/2018
Administrative Office – Technical Department
4. The warranty becomes null and void if:
• The product has self-evidently not been serviced,
• The machine has been used for improper purposes or
has been modified in any way,
• Unsuitable lubricants and fuels have been used,
• Non-original spare parts or accessories have been used,
• Work has been done on the product by unauthorized
persons.
5. The warranty does not cover consumables or parts subject
to normal wear.
6. The warranty does not cover work to update or improve
the machine.
7. The warranty does not cover any preparation or
maintenance work required during the warranty period.
8. Damage incurred during transport must be immediately
brought to the attention of the carrier: failure to do so
shall render the warranty null and void.
9. The warranty does not cover injury or damage caused
directly or indirectly to persons or property by defects in
the machine or resulting from the forced extended disuse
of the machine.
DATE
DEALER
s.p.a.
Fausto Bellamico - President