DJ-Tech D JM-303 Manual De Instrucciones página 6

PART NAME AND FUNCTIONS
22. PFL/Master Switch - The position of this switch will determine the level meter mode.
In the "Master" position, the meter will detail the out level of the left and right channels.
In the "PFL" position, the left side of the meter will indicate monaural level of the PGM.
23. Level Meter - The dual LED's indicators are used to detail either the master output
level, a combination of the master output level or the PGM monaural level.
24. Source Input Selector Switch - These switches are used to select the input source
assigned to each channel. Each channel may only be assigned one input source at a
time.
25. Channel Gain - Used to adjust the input level for each channel.
26. Cross Fader - Used to mix the sound from the 2 channels.
27. Channel Fader - Adjust the volume for CH1 and CH2.
29
28
28. Power Switch - Turn this unit power ON/OFF.
29. Power Connector - This connection is used to connect your main power. Be sure
that your local power matches the unit's required power.
30. Master Balanced Output - These 1/4" TRS jacks provide a balanced line level
output.
31. USB PORT - Use the accessory USB cord to connect to a PC.
32. Master Unbalanced Output - Left & Right line level unbalanced RCA.
33. Record Output - The record out level is dictated by the channel and cross fader level,
it is not influenced by the master volume control.
39
30 31 32 33 34
6
38
37
35 36