TRP COMPACT N&D Instrucciones De Montaje página 22

COMPACT N&D
EN
Place (2) fastening supports, with (1) washer
8
and (1) M8 self-blocking nut, without
tightening.
Screw 10 mm deep (4) M6 x 80 studs, where
9
indicated distance (D) in figure point 16.
To place (1) rubber washer diameter 6 (1),
10
plane washer diameter 6 wide wing and (1)
nut M6, over each of the spigots of M6. After,
to tight the nut til the rubber washer remain a
little tight.
8
(D) 70 mm
22
9
9
plane
washer
plane wide
wing
nut M6
®
8