Control Panel - CORBERO CHS G 4220 B DIG Manual De Instrucciones

CONTROL PANEL

Function Buttons & Knobs
（1）
"START/CANCEL" button :
①Once the function is selected, it can be activated by pressing the "START/CANCEL" button.
② During the operation, press this button to exit the work and return to standby.
③Press and hold about 3S to clear all settings and return to standby.
（2）
"FUNCTION" knob: This knob can be used to select function. The function icon will blink in LED display
when the function is being selected.
（3）
"TEMP/TIME" knob: The temperature/time can be adjusted by this knob.
①After the selected the function, turn the knob to set the desired cooking temperature.
②press the knob once, switch to the time setting mode, turn the knob to set the desired cooking time.
③Pressing the knob repeatedly can switch the temperature and time setting mode repeatedly.
OPERATION INSTRUCTIONS
1.
Operation
（6）
Place the food to be cooked on the Wire Rack/food tray. Insert the rack/tray into the middle support
guide of the oven.
（7）
Turn FUNCTION knob to select the "
（8）
Turn TEMP/TIME knob to set desired baking temperature. To set the time, press the TEMP/TIME
knob
".