Fermax INKEY-MINI Manual De Instalador página 25

Cod. 970079 V10_19
STEP 6: If there are many users it is recommended to use the INKEY-MINI software to transfer users
between readers.
1º Connect the reader by IP and configure its IP address, Port and ID reader number.
2º Change the ID number of the different readers and their IP address. No addresses or ID
numbers can be repeated.
1
a- Go to "Com Settings".
b- Go to "Device ID" (1 ~ 150).
c- Go to "TCP/IP Settings" (DHCP, o IP, subnet mask y port).
25