Fermax INKEY-MINI Manual De Instalador página 31

Cod. 970079 V10_19
If the installation is done with IPAXES.
1º Do steps 1, 3, 4 or 6 of STAND-ALONE.
2º Configure the IP_AXES central unit and the corresponding reader output as PERSONALIZED WIEGAND
34bits (2-34bits).
3º The fingerprints and/or cards of all the users will have to be presented again to register them in the
IP_AXES software, through one of the Wiegand fingerprint readers.
4º Check the correct functioning of the users registered in IP_AXES and who open the corresponding door.
31