Adding The Ptz Camera To The Lnr / Nr Series Nvrs - Lorex LNZ32P4 Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3
Connecting the Camera
1. Connect the camera to a power adapter (not included).
NOTE
For power requirement specification, see 8 Technical Specifications.
2. Connect the camera to a router in the same network as your NVR using the included
Ethernet cable (or an Ethernet cable of up to 300ft (91m) rated CAT5e or higher).
Step 2 of 2: Add the camera to your NVR:
• For instructions on adding the PTZ camera to the LNR / NR Series NVRs , see 3.3 Add-
ing the PTZ Camera to the LNR / NR Series NVRs, page 5
• For instructions on adding the PTZ camera to the LNK Series NVRs, see 3.4 Adding
the PTZ camera to the LNK Series NVRs, page 6
NOTE
For instructions on how to locate the serial and model number of your recorder, visit
com
and search for "Where is the Serial and Model Number located".

3.3 Adding the PTZ Camera to the LNR / NR Series NVRs

To add the PTZ camera to the LNR / NR Series NVRs:
The following instructions are based on the LNR400 Series NVR. See your NVR's instruc-
tion manual for instructions on controlling the PTZ camera with your system.
NOTE
Not compatible with LNR200 / LNR300 Series NVRs. For the latest list of compatible recorders, see
www.lorextechnology.com/compatibility.
You must have at least one empty channel before attempting to add the camera to the NVR.
1. Right-click during live view and select Device Search.
2. Log in using the admin account (default user name: admin; default password:
000000).
3. Click Device Search. The system searches the network for compatible cameras.
4. Check the camera(s) you would like to add.
#LX400075; r.41474/44665; en-US
www.lorextechnology.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido