Using The Chronograph; Chronograph Reset - Lotus ILM6S50 Manual De Instrucciones

USING THE CHRONOGRAPH

This chronograph is able to measure and display time in 1/20 second united up to maximum
of 59min 59sec. The chronograph 1/20 second hand keeps continuously for 30 seconds after
starting, and then stops at Zero position.
[Measuring time with the stopwatch]
1. Press button " A " to start the chronograph.
2. The chronograph can be started and stopped each time button "A" is pressed.
3. Press button "B" to reset the chronograph and chronograph minute and second
hands return to their Zero positions.
Reset
measurement
ILM6S50
Time
Stop
14
ILM6S50

CHRONOGRAPH RESET

(incl. aftEr rEplacing battEry)
This procedure shoud be performed when the chronograph second hand does not return
to the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button "A" once to set the chronograph second hand to the Zero position.
3. Press the button "B" once to set the chronograph 1/20 second hand to the Zero
position.
* The chronograph hands can be advanced rapidly by continuously pressing button
"A" or "B".
4.
Once the hands are set at Zero position, reset the time and return the crown to its
normal position.
15