Twin-Star International 23TF2322 Manual De Instrucciones página 8

PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT" INSTRUCTIONS
PRIOR TO INSTALLING ELECTRIC
INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL
THE INSERT IN YOUR FIREPLACE
21. Lift insert carefully into the back of the unit
and center in the insert opening. Do not drag
insert across Hearth/Base (A) as it may
scratch your unit.
22. Insert Wood Dowel (N) into the holes in the
Hearth/Base (A). Attach Securing Block (Y)
to hold insert from back. Using the Bolts (L)
and Washers (M) through pre-drilled holes.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES. MOVE
COMPLETED UNIT WITH GREAT
CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS
FINAL POSITION.
23. We have included two Tipping Restraints for
this unit. You must install this hardware to
prevent accidents or injuries. When properly
installed, this restraint can provide protection
against unexpected tipping of the Unit due to
small tremors, bumps or climbing. We
strongly recommend mounting this hardware
to a wall stud and your Unit.
Warning: You must install the Tipping
Restraint Hardware to help pre
vent accidents or damage to the
unit.
Twin-Star International, Inc.
Delray Beach, FL 33445
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 23TF2322
Made in China
Printed in China
© 2010, Twin-Star International, Inc.
E-7
Electric
Fireplace Insert
Completed Unit
Cabinet
Install
Insert
From
Back
L
M
Securing
Block
Y
Wall Stud
Wall